|
ALL PARTS GUARANTEED
Some even have a |
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
Are you here
by mistake and want our mobile-friendly site?
UNinsulated:
OUTDOOR WOOD FURNACE INSTALLATION
KIT Typical for
furnaces with a built-in hot water heat
exchanger, such as Shaver Furnace or Hardy;
one heat exchanger and hot
water hookup
OR varies
But a
12"x12" is only $86.49 (Import)
1"
Please call for options We also have a hot water kit that
includes a thermostat, pump flange and all of the
fittings for the top and bottom of the heat exchanger.
($64.19) Only $1-2 a foot more than pipe you make/insulate
yourself!
Download
Diagram for hooking up a Pool, Hot Tub or Spa. Sales and
Customer Service for installation PARTS
Ted: 828-687-4074
Building codes (or
lack thereof) often allow a homeowner to do much, it not all of
the work themselves. In other locations a licensed
electrician and plumber may be required to do the actual hookup.
But no tools are needed to plumb it as all the fittings are
push-on by hand fittings. Check with your
local Building inspector's office for your frost line level, in
your area. We sell a battery charger and
inverter combo that is easy to install and use, that will supply
back-up power to you outdoor wood burning furnace! Utility Power - When
stove sentry is used with a 90 A-HR Marine Battery (purchased
separately), its highly
efficient circuitry can provide up to 8 hours of operation when
you have a power failure. How it Works: When electricity is
present the Surefire Stove Sentry charges a battery and surveys
the power line. At the instant that a power failure occurs, the
Surefire Stove Sentry converts the energy stored in the battery
to AC power. This assures operation of the wood furnace or
pellet stove without interruption during the absence of
electricity.
When AC utility
power is restored, the Surefire Stove Sentry reinstates AC
utility power as the prime energy source to operate the wood
furnace or pellet stove. Simultaneously and automatically the
Surefire Stove Sentry commences the recharging of the battery,
to return it to full capacity in preparation for the next power
failure. Cost is $488 and you will need to purchase a
deep-cycle battery. You can also install
a small solar panel to charge the battery, instead of using line
power and use a less expensive inverter. Please remember that
you will also need a power supply (backup) for your furnace fan!
A small generator will do the trick.
Click on
picture for a HUGE image. Modem users click
HERE. For Pool and Spa Heaters, see
Sales and Customer Service for
installation PARTS 828-687-4074 or e-mail:
Many garages or shops use
an air handler like the one below.
Some are in big boxes, like above and some are
simple hanging units like below
Unit Heaters - Heat Exchangers with blade fan
Thermostats for
hanging heat exchangers For those that want to save money, you can
make on yourself. Many people use old squirrel cage fans (from
old furnaces)
Typical
Heat Exchanger that
is installed in the supply plenum
What's
nice is that you have 4 Pex lines for heating 2 extra your hot water
heater. Heat loss: 3-wrap/1.5
degree per 100 feet Heat
loss: 5-wrap/0.62 degrees All pipe wrapped THREE times with insulation as
opposed to being only wrapped 2 and three times by Our
competitors - and many use Chinese (junk) Pex!
Pre-insulated Pex pipe for outdoors. Made to be put
underground. Totally insulated with THREE wraps
high-density polypropylene foil foam insulation. Includes 3-wraps of high-density
polypropylene foil foam insulation surrounding the PEX
tubing and placed in a 4” heavy-duty UV protected drain tile.
$7.89 a foot for 4 Pex pipes (2 x 1" & 2 x 3/4") in a 4" pipe.
______________________
Typical insulated Pex Pipe buried underground
Shaver Furnace set
up Other parts, accessories,
and installation kits and applications available, including
Woodmaster, Taylor, Hardy, Central Boiler, Classic, Royal, Heatmor. AquaTherm, Clear Flame, Mahoning Outdoor Furnaces, Freedom,
Acme, Earth Stoves. Nature's Comfort, Heat Master, Heat Source,
Lil'House Outside Wood Heater, Portage & Main, Empyre Wood
Burning Furnace, The Homesteader, Wood Master, Wood Doctor,
Northland, Greenwood, Royal, Woodchuck, Crown Royal Stoves,
Global Hydronics, Johnson Stoves,
Click on
Picture for a LARGER IMAGE 1. Goes
to house, to heat exchanger. You can heat all the hot
water you need and store it in your existing hot water
tank, just like you water heater does no, except that
it will be free heat! This will save most people
$35-$65 a month! With an electric hot water
heater, we recommend that you remove the pop-up valve
and replace it with a 3/4" nipple and a T for
your incoming water. Put the pop-up valve back on one
side of the T and the circulating pump on the other. Remove the drain and do
the same, putting in a T with the drain on one side
and the outgoing water (Pex Pipe) on the other. Put a surface mount
thermostat beside, above or below the bottom element.
About $5 - 8 at your local hardware store. Wire it so
that 110V goes to one side of the thermostat and the
other side is wired to the pump. Common goes straight
to the pump, as well as a ground wire. You just saved $200 for a
less efficient side-arm or plate heat exchanger! You
can still use the heater as normal. Simply turn the
thermostat down lower on the hot water heater than on
the thermostat just installed, or turn off your
breaker for the pump (or unplug it).
For a gas heater, there is usually a plate than can
be removed to gain access to the tank itself. Simply
mount the thermostat on the tank and follow the other
instructions for water hookup above.
Hot water heater pump
diagram, wiring and Pex Diagram
See
Domestic Hot Water Installation Kits Here
Instructions
for SHAVER FURNACE INSTALLATIONS
This is the
Easiest System for Self Installers! 80 - 90% of
our customers install this outdoor wood furnace themselves! You will
NOT void the warranty by installing the furnace yourself! Every
furnace comes with a complete detailed 59 page manual with lots
of pictures and diagrams! Installing an outdoor wood furnace can
be broken down simply. The parts needed will usually cost about
$900 if the outdoor furnace is 50 feet from your home, including pre-made
pre-insulated Pex pipe: Remember, this
is just an overview. You can get a comprehensive 59 page
manual from Shaver Furnace with lots of pictures and diagrams to make it super easy
for you!
We accept VISA, MasterCard, Discover and AMEX,
828-687-4074 Call
NOW!
Outdoor Wood
Burning Boiler
Parts
Modine style Hanging Heat Exchangers
Unit Heaters -
Hanging Heat Exchangers with fan
Domestic Hot Water Heaters and Kits
Tube and Shell Heat Exchangers
Wiring a
Installing a
Insulated pex tubing wood
boilers
Do you want to hire a
meticulous house painter in Asheville NC? Choose Terry Rumler!
outside wood boiler
parts
|
|
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
3-wrap
5-wrap;
