The side-arm is narrow and is easily mounted to the side of your existing hot water heater, usally at existing fittings such as your drain and pop-up valve with the other two pipes running to your boiler that does NOT have a built-in heat exchanger, such as Hardy and Hyprotherm Furnace
Simple to install using Pex or existing copper pipe and push fit fittings.
VERY IMPORTANT! Needed so your kids and guests (or you) don't scald your hands because both of the heat exchangers can produce hot water up to 180F
3/4" Mixing Valve Taco Sweat - Lead Free @ $104.00
(3) 3/4 CRIMP X 3/4 MA SW ADPT PEX BRASS @ $8.67/3
1" Mixing Valve Taco Sweat - Lead Free @ $123.97
(3) 1 CRIMP X 1 MA SW ADPT PEX BRASS $13.47/3
A 10 or 20-plate water-to-water plate heat exchanger is all that it usually needed
Pump at the bottom, mounted to the 'T' that replaced the drain. See our kit
HTML Generator